ElecGear 2x TMR Joystick Replacement for ASTRO C40 TR Controller, PCB Assembly Soldered Module with TMR Electromagnetic Control Stick Replacement for Analog Stick

• [TMR Joystick for C40 TR] – The joystick PCB assembly works with ASTRO C40 TR controller. It’s a direct repair replacement for stock analog stick module. No desoldering and soldering required. With the newest TMR stick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, smoother movement and longer lifespan
• [About TMR Technology] – Based on Tunnel Magnetic Resistance effect, TMR sensors have higher accuracy, take less power (200uA), are more resistant to high temperatures, and are less susceptible to external interference. Compared with the older carbon film potentiometers and Hall rockers, joysticks using TMR technology are more suitable for high-end controllers.
• [About Calibration] – Swap the old analog stick PCB with new TMR stick PCB. Gently screw in the 2 screws. Not too hard for the plastics is fragile. Press and hold the Program Button on the underside for 5 seconds. The controller will rumble once. Wait for 30 seconds. It will rumble once again. The center was reset. Rock the joystick 3-4 circles to calibrate the outer range
• [What’s in box: TMR-C40] – 2x TMR Stick PCB Assembly, 1x T6 Screwdriver. (🔺1. Controller, the plastic enclosure and screws are NOT included. 2. Please refer to the video on the same product ID of U.S. Amazon for the demonstration of the installation steps.)

Model: TMR-C40 The joystick PCB assembly works with ASTRO C40 TR controller. It’s a direct replacement for stock analog stick module. No desoldering and soldering required. With the newest TMR stick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, smoother movement and longer lifespan [Reminders:] 1. Follow the User Guide to swap in the new PCB assembly 2. Follow the User Guide to calibrate the new module 3. Outer plastic enclosure and controller are NOT included 4. Please refer to the video on the same product ID of U.S. Amazon for the demonstration of the installation steps What’s in the box: 2x C40 PCB Assembly Soldered with TMR stick 1x T6 Screwdriver