Egg Shaped Candle Mold - Height: 2 in, Width: 1.6 in - 30 ft. of Wick Included as a Gift - Plastic Candle molds for Candle Making

• EGG SHAPED CANDLE MOLD: It is made of two separate parts, so the candle can be easily taken out when it is properly cooled after the pouring process.
• PLASTIC CANDLE MOLD: Highly resistant to high and low temperatures plastic, conveniently made, easy to assemble and use.
• CANDLE MOLD SIZE: Designed upon our customers’ request, the height of the egg shaped mold is 2 inches, and the width is 1.6 inches.
• CANDLE MAKING PROCESS: Paraffin, wax, beeswax, soy wax, can be poured into this mold. Please follow the instructions on pouring temperatures very closely.
• GUARANTEE: If you are not satisfied, we can exchange the mold for a different one, or reimburse the money.

The egg shaped candle mold is for candle making and it is made of caprolon. The material is resistant to high and low temperatures, so the molds do not crack or split during usage. Caprolon is very durable and can be in contact with paraffin additives and acidic environments without any harm and the candle molds can be used unlimited number of times. We have a wide variety of molds for the candle casting. Important to know: 1. The surface can be porous due to low pouring temperature (below 140 °F degrees), or poor wax quality. Follow the recommended wax temperature before pouring. 2. The gloss on the surface may not be formed because of the higher pouring temperature than the recommended one. The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the pouring temperatures recommended for the candle base you are using, as this may cause leakage of the candle mass and difficulty when pulling the candle out of the mold. Make sure you also do not exceed the maximum temperature allowed for molds (176 °F), since they may be deformed. 3. It is normal if a well is formed in the center of the candle after the product is finished, because candle mass expands when heated and decreases during solidification. 4. Sometimes it is difficult to remove the candle out of the mold if the wax is heated to high temperatures, creating more cohesion. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the maximum set for the candle base you are using.