EDELRID Ohm Ascenders, Safety & Belay Devices green/black 2018 safety climbing accessories

• Breaking force: 20 kN
• Safer requires less hand force to hold a fall
• Draining a heavy climber much easier to control
• Installed in the first hook of the safety chain
• For single ropes with a diameter of 8.9 - 11 mm

Assisted-braking resistor for increasing rope friction when there is a large weight difference between the belayer and lead climber. In the event of a fall, the OHM increases the amount of rope friction so that a lighter belayer can hold a heavier lead climber without difficulty. Belayer requires significantly less hand braking force to arrest a fall Lowering a heavier climber is much easier to control OHM is attached at the first bolt in the safety chain Should a lead climber fall at the first bolt, the OHM significantly reduces the risk of a possible ground fall Rope handling when belaying a lead climber not affected (no additional friction when paying out rope) Recommended weight difference (lead climber > belayer): 10–40 kg Minimum belayer weight: 40 kg For single ropes from 8.9–11.0 mm Approved rope diameter: 8,9 - 11 mm Manual: Yes User manual Ohm User manual Carabiner EU Declaration of Conformity Ohm EN 566 EN 12275 Inspection Instruction Slings - Tape - Lanyards Inspection Instruction Carabiner