Dry Top Heavy Duty Tarp, Polyethylene (PE) Aluminum, Silver/Brown, 10x15 Feet

• Super Heavy Duty Industrial Polyethylene
• Ultraviolet treated to reflect sunlight
• 14 by 14 Cross weave
• Industrial Capped Reinforced Corners

Customers have trusted the DRY TOP brand for over 30 years. Pay close attention to actual spec information, as not all tarps are created equal. With our “Good, Better, Best” lineup along with our specialty tarps you are sure to find the right tarp for the job. DRY TOP tarps are full finished size vs. cut size. When purchasing a tarp it is important to note the “cut size” vs. the “finished size”. Our DRY TOP brand Medium Duty and Heavy Duty tarps are cut larger so they finish to a full size. The industry standard is that tarps are cut and then finish up to 1’ shorter on each side after closing seams and hemming. For example, an industry standard 5’x7’ is rough cut at that size and finishes approximately 6” shorter. That’s almost 20% shorter than the listed size after it’s finished! Make sure your tarp is a DRY TOP tarp for a FULL FINISHED SIZE. DRY TOP Medium Duty tarps are a dual laminated, 10x8 weave, polyethylene woven tarp. These tarps have rope reinforced hems, rust-resistant aluminum grommets on corners and approximately every 36”, heat-sealed seams and hems and are a full finished size (+/- 3%). Available in 25 sizes and either blue or brown/green reversible colors. Always make sure that your tarps are securely tied down. Do not allow product to “flap” in the wind as this will drastically reduce the life of the product. Covered items should be adequately ventilated at all times. Keep product away from fire, as it will ignite and burn if brought into contact with an open flame.