Drive-in nuts with 4 drive-in tips, galvanised steel, available in M4, M5, M6, M8, M10 (M6 x 9 mm, pack of 50)

• Drive-in nut similar to standard DIN 6930 / ISO 6930 g
• Material properties: galvanised steel
• Size: M6 x 9 x 19 mm (sleeve diameter x height x total diameter)
• Drilling diameter: 7.2-8.0 mm (for soft materials if necessary slightly smaller)
• Scope of application: furniture construction, woodworking, model building, speaker construction, climbing sports, etc.

The drive-in nut, also known as the impact nut, is used where the production of an internal metric thread is necessary, but due to the material properties is not or difficult. For this purpose, a hole of the size must be manufactured in advance. Then the drive-in nut with the threaded sleeve is inserted in advance from the back into the prefabricated hole. We recommend you use a rubber mallet. The impact nut should be flush with the surface. During the assembly of the required screws, wheels, climbing stones, etc., the 4 claws dig deeper into the material, resulting in a form-fitting connection that guarantees a secure hold. Important: To improve or increase the hold of the nut, a special wood-metal adhesive can be used. However, care should be taken to ensure that it does not reach the thread. Thanks to the use of high-quality galvanised steel, our nuts are rust and oxidation resistant. However, we recommend that you only use them indoors or in protected outdoor areas. These universal helpers are used in the following areas: Furniture construction. Wood processing. Construction of climbing / boulder walls. Blind and substructures. Model building. Speaker construction. Flight case construction (for attaching wheels and rubber feet). and much more... Product features: Metric internal thread. Similar to standard: DIN 6930 / ISO 6930 g. Material: high-quality galvanised steel