Drive-in Nuts with 4 Drive-In Tips, Galvanised Steel, Choice of M4 M5 M6 M8 M10 (Pack of 100, M8 x 11 mm)

• Drive-in nut similar to the standard DIN 6930 / ISO 6930g
• Material properties: galvanised steel
• Size: M8 x 11 x 22 mm (sleeve diameter x height x total diameter)
• Drilling diameter: 9.2-10.0 mm (for soft materials if necessary Slightly smaller)
• Scope of application: furniture construction, wood processing, model making, speaker construction, climbing sports, etc.

The drive-in nut, also called impact nut, finds its use where the production of an internal metric thread is necessary, but due to the material properties it is not possible or only difficult to achieve. For this purpose, a bore must be made in advance to the size. Then the drive-in nut with the threaded sleeve is hammered from the back into the prefabricated bore. We recommend using a rubber mallet. The impact nut should be flush with the surface. During the installation of the required screws, rollers, climbing stones, etc., the 4 claws dig deeper into the material, creating a form-fitting connection that is guaranteed to hold securely. Important: To improve or increase the grip of the nut, a special wood-metal adhesive can be used. However, care should be taken to ensure that it does not get on the thread. Thanks to the use of high-quality galvanised steel, our nuts are rust and oxidation resistant. However, we recommend that you only use them indoors or in protected outdoor areas. These universal helpers are used in the following areas: Furniture construction Woodworking Construction of climbing/boulder walls. Blind and substructures Model making. Speaker construction Flight case construction (for attaching wheels and rubber feet). and much more... Product features: Metric internal thread. Similar to the standard: DIN 6930 / ISO 6930g. Material: high-quality galvanised steel