Drill Pump, Mini Plastic Water Oil Drill Pump Self Priming Portable Anti-Corrosion High Temperature Resistant

• Drill pump is made of moulded plastic, heat resistant, anti corrosion.
• Use with electric power drills and hose pipe, high flow, stable performance and high efficiency.
• Small size and lightweight, convenient installation.
• This self priming drill pump is designed to work with a corded or cordless drill,fits most electric drills;Converts virtually any drill into a high capacity pump capable of emptying sinks,aquariums,pool skimmers and much more
• Come with two connectors and two hose clamps, easy to install and simple to use. No batteries needed.

A top quality drill pump. This drill pump may not be the cheapest around, but it is well made, high flow and will handle fluids that would destroy the internals of some other pumps. Suitable for virtually all fluids, this will handle diesel, kerosene, oils, water etc. For use with any power drill, electric, air or cordless. The faster the drill the faster the water flows. Operation instruction : 1. To achieve optimum priming and long service life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use. 2. Be sure inlet hose is airtight and as short as possible, inlet hose should not exceed 2.75m. 3. When pumping abrasive fluids or liquids with solids, using a strainer on the inlet line for longer service time. 4. It is recommended that the pump is mounted to a surface for security and ease of use. 5. Mount and start drill, observe whether the inlet pipe has a certain fluid that is sucked into the pump within 15-20 seconds. If not, check that inlet tube is properly mounted to inlet pump. Do not run dry, if pump fails to prime, check if the hose is kinked or clogged. Package including: 1 x drill pump 2 x hose clamps 2 x connectors