DieseRC 3pcs Garage Door Remote Control Cloning Remote Control 433MHz Universal Remote Control Wireless Keychain Duplicator

• 【Great design】433Mhz RF universal wireless remote control. It is a duplicator which can clone other remote control. Strong signal can pass walls, floors, doors,board and so on.It can be controlled within 50 meters distance in open area.
• 【Wide coding range】2260,2262(such as PT2262, SC2262, HS2262, LX2262, HX2262, etc.),1527(EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527)PT2264, PT2240(LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003.Although different chip manufacture has different chip model prefix, it will be OK, as long as the chip model numbers are same.
• 【Easy to use】There are three conditions should be confirmed before purchased. ①The original remote control works normally.②The frequency should been 433.92Mhz. ③The chip Code(Encoder Chip) as listed.
• 【More Flexibility】 There are 4 buttons on the remote control which means you can clone 4 buttons. Each button operates independently. The clone remote control can reset and set up without limited times.
• 【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can use the copy remote control to clone many remote control. such as, garage door, electric door, shutter door, expansion door and electric curtain, fan, Lamp, lighting, ventilation device, Signal transmission and so on.

Package Include: 3x cloner remote controls Product manual Parameter: - RF frequency: 433MHz - battery: 2x CR2016 (included) - Size: 55mm*30mm*14mm - Button: 4 Keys - transmitter range: Open space is more than 50 meters Please confirm three conditions before purchasing. 1: The original remote control works normally. 2: The frequency: 433.92Mhz. 3: The chip Code (Encoder Chip) as listed below 2260,2262,1527(EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527)PT2264, PT2240(LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003 Note: Rolling code remotes will not work!!! Reset: Press and hold "A" and "B" keys together---Led will flash 3 times. And then release "B" key (meanwhile “A” key still holding on all the time) and click "B" key 3 times---Led will flashing and then light off. succeed. Programing 1. Put the original remote and cloner remote into "back to back" position. Make sure they have direct contact. Or the two remote controls should be placed as closely as possible (put the two remote controls on the desktop side by side with zero distance). 2. Press and hold one key on your original remote, and then press and hold one key on your cloner remote. Keep holding until LED will make 2 blinks (Notice: LED 2 blinks not to release button) Then 3 blinks then into steady and you have successfully cloned. If for some reason the clone does not go further than 2 blinks, it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through. For the presence of noise, it should avoid interference to operate, if the copy is not successful, it should recopy after clearing code.