Damp Proof Epoxy Resin Water Based Paint for Garages, Walls, Basements and Tanks - 1L (Dark Blue)

• As a membrane to prevent rising damp in floors.
• As a general waterproofing and decorative finish for all brick, concrete, cement and masonry surface
• For application to damp surfaces where other paints cannot adhere
• As a tank lining for protection against mild chemicals.
• ALSO ALAILABLE IN 2.5 Litres AND 5 Litres Please visit our Store

Damp Proof membrane paint for floors, basements, water tanks and walls. "The System That Really Holds Water" ASK WATERBASED EPOXY is water based epoxy coating suitable for all applications where concrete or masonry requires waterproofing and protection. It is applied in the same manner as ordinary emulsion paint with the added benefit of application in damp conditions. Once dried ASK WATERBASED EPOXY leaves a tough, non toxic, waterproof, easy to clean surface. Location of use Basements and areas needing a damp proof membrane. Water tanks and sewerage treatment plants. Abattoirs and fisheries. Dairies and milking parlours, food factories and breweries. Grain silos. Chemical industry garages. Bunds and water plants. Curing Tough cure in 4 hours – hard dry in 12 hours – maximum cure 8 days. Once cured can withstand pressure washing, steam cleaning and washing with sterilizing liquids. Packaging Two part product which when mixed gives 5 litres, 2.5 litres and 1 litre depending on size purchased. Clean, easy to use, recyclable packaging. Coverage and storage Coverage is approximately 7 square metres per 1 litre. This may be reduced on rougher more porous surfaces. Store in cool, dry conditions in original tins. Protect from freezing. A shelf life in excess of 12 months can be expected. Cleaning equipment If using spray equipment, rinse thoroughly with cold water frequently to avoid build up of cured paint. Brushes and rollers should be washed in cold water and mild detergent. Application and General Instructions Surfaces to be filled must be clean and free from all foreign matter such as grease, dust and loose or flaking paint. A two part product– simply mix pack B into Pack A stirring continuously and add water to fill line. As easy to use as ordinary emulsion paint, apply using a brush, roller or spray. 2nd coat should be applied as soon as 1st coat is touch dry. Assorted colours available. Non Toxic, tough and durable