Contact adhesive glue 0.8 kg for contact adhesive cork print cork boards etc. Wakol

• Use: for setting cork boards according to DIN EN 12104 with untreated or treated surface on absorbent and non-absorbent substrates as well as on fixed floor coverings. Also suitable for cork wall coverings and the staircase carpets. Wakol D 3540 complies with the DIN EN 14259.
• Similar to the one in the picture. Other container size.

Scope of application: This product is particularly suitable for bonding the cork boards and adhesive cork tiles. The material must be coated on both sides with the adhesive. After drying (the adhesive becomes transparent), the surfaces can be pressed against one another. The material develops its adhesive effect upon contact. Consumption per m² include at least 250g. For the setting up of cork boards in accordance with DIN EN 12104 with untreated or treated surface on absorbent and non-absorbent substrates as well as on fixed floor coverings. Also suitable for cork wall coverings and the staircase carpets. Wakol D 3540 corresponds to DIN EN 14259. Application method: With Wakol primer roller or velours roller on cork wall coverings, for carpet floorings with brush or trowel notch size. Minimum 250g/m² for laying cork, otherwise approximately 150 - 650g/m². Airing time: Approximately 30 - 45 minutes on absorbent surface, approximately 60 - 90 minutes on non-absorbent surface. Open time: approximately 120 - 180 minutes, with pre-coating approximately 60 - 90 minutes. Storage instructions: Do not keep below +5°C, frost-sensitive material: latex/acrylate dispersion. Emicode: EC1 Giscode: D1.