Concrete Frame Fixing Screws - Frame Screws Heavy Duty 7.5mm x 100mm - 100 Pack with T30 Torx Driver Bit

• Manufactured from Harden Steel, Zinc Plates and Yellow Passivated these are the ideal screws for masonary
• These concrete frame screws can be used as upvc frame fixings, fixing through the frame directly in to the brick
• The concrete screws are designed with a Star T-30 head ensures tight grip. With a drive bit included with every unit order e.g pack of 100 includes 1 drill bit
• These easy drive countersunk direct concrete screws are designed so no wall plugs are required when fitting
• Due to the way the frame fixing screws are threaded, once the concrete screw has been installed you are able to remove it

The concrete screws thread directly in to the masonry eliminating the need for a plug. This easy application and improved fitting provides a permanent and secure fastening solution in a wide range of materials. They are designed to provide a strong and secure hold, and to be installed quick and efficiently, even into hard substrates. They can also be fixed close to the edge of the concrete, without the risk of going out of shape. Simple Installation: They have a quick and easy method of installation, as they are directly screwed into the concrete. Pre-drill and blow out the hole using a 6 or 6.5mm drill bit, then insert the screw. You will save time compared to traditional installation methods and unlike other anchors you do not need additional steps or tools. This helps reduce installation time and increases efficiency. Flexible Installations: Due to the way the screw is threaded, once the concrete screw has been installed you are able to remove it. This is great when you are working on projects that are always changing or if a mistake is made. Because concrete screws do not apply expansion when installed they can be placed close to the edge or to each other. Budget Reductions: You will save time on the easy installation, from the reduction in time it takes to complete a project, if a mistake is made it is quick and easy to remove the screw and refit. This simple installation also means you will not need additional equipment, further reducing costs. Star T-30 Drive Head: This 6 pointed star shape helps to give more point of contact with the driving tool. This give a greater amount of torque which make the screwing in and out of the screw that much easier to do. Harden Steel: Concrete screws, due to their thread can be installed and removed using the same hole whitest still keeping the same grip when (re) fitted. However, as you may have experienced, a screw that has been fitted in can lose the grip of the drive head as it starts to shear. The CON-SERT concrete screw is made from hard steel, and along with the better grip of the Star T-30 drive, is less likely to suffer from this issue. Product Features: Made from Harden Steel Zinc Plates and Yellow Passivated Star T-30 head ensures tight grip. Drive bit included with every unit ordered Pilot holes can be created with SDS drill bits in 6 mm and 6.5 mm diameters