Pandoras Upholstery Complete Replacement 29 Inch Zig Zag Springs x 10 Kit Upholstery Supplies For Chair Sofa Seat Settee

• Replacement Chair Springs - Steel Wire 9 Gauge
• Measure The Old Spring Laid Flat To Get The Correct Length You Require. Alternatively, A General Rule Of Thumb Would Be To Measure From Edge To Edge On The Frame And Add An Inch (Or 2 Inches For Longer Springs) To Get The Desired Length
• Pack Of 10 Springs
• Each Kit Comes Complete With 2 Clips And 4 Nails Per Spring
• Comes In 100% Recyclable Pandoras Branded Box. This item is sold by Pandoras Upholstery and is a registered trademark of Pandoras Upholstery

Product description Zig Zag Springs (also known as No-sag or Serpentine springs are used a lot in modern furniture) . A minimum of 5 springs should be used under each seating area i.e. chair = 5 springs, 2 seater sofa =10 springs. However the more zig zag springs used the firmer the seat. When the zig zag springs are fitted across the seat they should be almost flat with just a slight dome upwards and all the zig zag springs should then be tied into place with laid cord, three rows across a normal size seat. This makes the zig zag springs act as a unit instead of individually, which can cause them to break easier. The zig zag springs are then covered with hessian and a padding, we recommend our Pandoras Upholstery Hessian as it is very strong and easy to use. The seat can then be covered with calico (also available by Pandoras Upholstery) and/ or your top cover. The zig zag springs are stocked in standard sizes but can be easily cut with a hacksaw if you need to adjust the size. Safety Warning Always ensure springs are fitted correctly and almost flat with a slight dome upwards. Be cautious when handling alloy steel components during assembly as they may be sharp.