cmtutensili Fresa WIDIA G6 706.12 rifilare mm 12.7 mm

• With these CMT flush cutters, you can master any task related to flush and copy milling.
• Especially the stronger diameters are also designed for difficult tasks.
• These tools are equipped with carbide cutting edges to ensure long durability.
• RECOMMENDATIONS These cutters are perfect for making tenon holes through the wood. With a straight cutter Ø13 mm (711.130.11), a 5 mm deep channel is created on the side of the piece of wood on which the pin hole is to be performed. Use a diameter 13 mm (517.130.31) spiral tip to drill a hole in one end of the channel through the wood.
• Turn the wood around to finish the tenon hole. Use a diameter 12.7 mm cutter with a cutting length that is slightly longer than the thickness of the bar, and with the guide pad track the path of the channel made on the opposite side of the wood. Shopping tips: after resharpening, use undersized bearings. Perform several passes with care to avoid breakage. Please note: Not guaranteed if used inappropriately.

Fresa per rifilare Riporti in carburo di tungsteno Realizzazione mortase passanti su legno Cuscinetto a sfera di appoggio e scorrimento Gambo mm 6