Clark Drain CD790R 600mm x 450mm x 65mm Recessed Block Paving Manhole Cover (Overall Size Including Frame is 695mm x 545mm x 78mm)

• IMPORTANT MESSAGE: ALL MANHOLE COVERS ARE MEASURED BY THE CLEAR OPENING SIZE THAT YOU ARE TRYING TO COVER!
• 600mm x 450mm x 65mm Solid Top Galvanised manhole cover and Strong PVC Frame
• Measurement of Clear opening hole size you are trying to cover 600mm x 450mm
• Overall measurement Including Frame 695mm x 545mm x78mm.
• Cover Size Only - 635mm x 480mm

CD 790R Recessed Manhole Cover and Frame. Clear Opening 600mm x 450mm x 65mm. External Dimensions 695mm x 545mm x 78mm* *Not including any strengthening supports. If you have difficulty clarifying what the clear opening size corresponds to, please refer to the second image (above). The best way to decide which cover is most suitable for you is by measuring the hole in the ground that is being covered. The CD 790R is recessed for infill of block paving or slabs. It has a 10 tonne gross plated weight load bearing capacity, making it suitable for domestic driveways or areas of light vehicular traffic. This cover has built-in lifting keys. Block paviors are the standard type of recessed manhole covers commonly found in paved areas and private driveways. If replacing a manhole cover in a garden, lawned area or similar, strongly consider using a GrassTop Manhole Cover, these incorporate pre-drilled drainage holes and factory fitted specialist membranes that gradually filter the water through and allow grass to grow. For installations with gravel infill or similar, we recommend the EcoGrid Grass and Gravel Covers to stop the finish material shifting under foot or traffic. They are also ideal for landscaped areas featuring rubber crumb, bark chippings, decorative stone and suchlike. GrassTop and EcoGrid covers are unique to Recessed Manhole Covers, part of EcoGrid Limited. Technical Data Galvanised steel tray with black polypropylene frame Integral lifting keys This cover meets the FACTA standards 7.0, 7.2, 7.2.1, 7.2.3 and 7.3.3, as well as mild steel material grade according to BS EN 1449:1991/EN10025, and galvanised standards to BS EN 1461:1999. Polypropylene Grade AP9.