CHARNWOOD 63Y Y-Piece with 3 x 63mm (2-1/2") Outlets, Clear PVC

• Y shaped splitter with 3 x 63mm (2.5″) ends.
• Used To split a single hose line into two branches when creating multiple connections.
• For use with our 65FLEX Hose.
• Hose clamps are required to fasten the hoses securely, 65HC.
• When using two branches it is recommended to close off the branch not in use, so that a higher airflow is achieved down the active branch.

Y shaped splitter with 3 x 63mm (2.5″) ends. Used To split a single hose line into two branches when creating multiple connections. Three connections are all 63mm diameter. For use with our 65FLEX Hose. Hose clamps are required to fasten the hoses securely, 65HC. A Joining Sleeve, 63SL, can be fitted to any end of the Y-Branch to connect it to another fitting such as a Hose Reducer, Blast Gate or clear PVC Tube. When using two branches it is recommended to close off the branch not in use, so that a higher airflow is achieved down the active branch. Shut off gates, 63G, can be attached to the Y-Branch using a joining sleeve, 63SL. These tapered sleeves form a tight push fit joint. The splitter is available in a Y or T shape. Sometimes the T shape is an advantage when creating a hose network, particularly when dropping down from head height. However the airflow is not as efficient as with the Y shaped branch.