Chamberlain 4330E, 4332E, 4333E, 4335E, Compatible Remote Control, 4 Channels, 433.92 MHz, Rolling Code Replacement Handheld Transmitter

• Compatible with Chamberlain Liftmaster 4330E / 4332E / 4333E / 4335E / 4330EML / 4332EML / 4333EML / 4335EML / HE4331 Handheld Transmitter, Transmitter, Remote Control
• 4 channels, 433.92 MHz rolling code/distance: extra long range of up to 100 metres
• Latest version with sliding button cover and sturdy housing. The elegant design made of metal and plastic makes it an ideal replacement for many fragile and expensive remote controls on the market! Easy programming process within 10 seconds!
• Programming instructions, video link, battery and key ring are included
• Even better quality than the original Chamberlain remote control

High quality 433.92Mhz rolling code compatible replacement remote control that can completely replace your Liftmaster / Chamberlain / Motorlift 4330E / 4330EML, 4332E / 4332EML / 4333E / 4333EML / 4335E / 4335EML remote controls. Parameters: 433.92 MHz rolling code frequency. Battery and key ring included. Compatible with the following Liftmaster / Chamberlain / Motorlift remote controls: 4330E (4330EML, G4330E, G4330) - 4332E (4332EML, G4332E, G4332) - 4333E (4333EML, G4333E, G4333E, G4333E). ) ) - 433 5E (4335EML, HE4331, G4335E, G4335) Program your remote control: Program the gate/garage door openers in the same way as the original Chamberlain Liftmaster remotes, see your receiver's manual. For a typical Chamberlain 8002E receiver, the programming procedure is as follows: 1. Press and hold the button of the remote control. 2. Press the learning button in the Control Center on the control panel of the door opener and release it. The indicator light flashes once. 3. Release the push button of the remote control. Now the opener works when the push button of the remote control is pressed. Note: If you release the remote control push button before the indicator lights flash, the opener will not accept the code. To clear all codes from the receiver, press and hold the receiver's learning button until the indicator light goes out (after 6 seconds). All codes learned by the recipient will be deleted. If you want to increase the range of the remote control reception to 150-200 meters, you can connect this antenna: https://www.amazon.de/dp/B0BWFH3TGT If you need car sun visor clip holder for remote controls, you can buy it here: https://www.amazon.de/dp/B07FVW7F59