Cata E-120 GTH fan, with timer, moisture control, hydrosensor, LED display, check valve, ball bearing, frosted glass front, energy saving, eco, quiet, modern

• Modern design, with quiet operation. Simple maintenance and assembly, and very economical.
• Timer / time lag can be set from 0 to 15 minutes. Adjustable humidity control (40 % - 95 % relative humidity).
• First speed level for continuous operation and micro ventilation. Second speed level for normal use.
• IP-X4. Detachable frosted glass front with LED display, temperature and relative humidity.
• Check film included.

Air flow rate: maximum 210 m³/h. Power consumption: maximum 15 W. Mains voltage: 220 V - 240 V, ~50 Hz. Sound pressure level: maximum 33 dB(A) revolutions, 2400 rpm. Humidity control: yes. Time lag / timer: yes. Conveyor temperature: maximum 40° C. Ball bearing: yes. IP protection class: IP44. Nominal width: 120 mm. The GTH model allows continuous ventilation (24 hours) of rooms with high humidity, by activating the S1 switch. If the humidity exceeds the set humidity value, the hygro function is activated and the fan operates at its maximum level. If the humidity level falls below the set value again, the device continues to work at the maximum level for the time set via the timer function, and finally switches off if set to "S1=OFF", or switches back to the low level if set to "S1=ON". The room ventilator is switched on at the maximum level when the light switch of the room in question is switched on. After switching off the light switch, the device continues to work at the maximum level for the time set via the timer function, and finally switches off when set to "S1=OFF", or switches back to the low level if set to "S1=ON". Can be mounted to the ceiling or wall. Includes check film.