Carrera 20020590 Digital 124 Inside shoulder curve 1/30° (6), end piece (2) Slot Car Track Accessory

• Lane widening of the inner shoulder on a scale of 1:24
• DIGITAL 124, DIGITAL 132, EVOLUTION
• Inner edge strip for curve 1/30 °
• Package content: 6 inner edge strips, 2 end pieces

Product Description This edging is important for skidding. The kerb strips on your Carrera track not only give your track a cooler look, they also allow you and your track cars to make breathtaking drifts on a scale of 1:24. Unfortunately, relatively large cars on 1:24 circuits often tend to slide off the track without a curb strip in the corner. Thanks to the borders, this problem can now be solved. This set contains six strips of inner borders for 1/30° curves. Two end pieces are also included. These can be mounted on the straight line at the beginning and end of the curve. Thanks to the 1:24 scale, this extension kit can be used on the Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION racetracks. Directions 1. Remove the strips from the package. 2. Place six strips of inner borders for 1/30° curves on your track. 3. Use two end pieces on the straight line at the beginning and end of the curve. 4. Use the edging for skidding and drifting on a scale of 1:24 on Carrera DIGITAL 124, Carrera DIGITAL 132, and Carrera EVOLUTION racetracks. Safety Warning not_applicable Box Contains Toys.