C.A.M.P. Tricam DYNEEMA Aluminium Set, Multi

• 2 uses as active and passive protection thanks to the specific design
• Work where other securing devices are not suitable (e.g. cracks and holes)
• Optimal in horizontal rock cracks
• Now their placement is easier with just one hand in sizes 0.125 to 2.0; their feature: a stiffened band achieved by innovative seams
• The Tricam in the most commonly used sizes (0.5, 1.0, 1.5, 2.0), with Dyneema band and therefore more resistant to active placement. With strong moisture, Dyneema is higher than nylon: it retains a higher breaking load when wet and prevents the band from absorbing water and freezing thanks to its water-repellent properties.

If you observe what the wizards of traditional climbing tours have with you, you will surely notice a good tricam range. These extraordinary clamping devices can be used as clamping cams with active protection as well as a clamping block with passive protection and often work where the placement of another device is not possible. They are ideal in the horizontal rock cracks, in the holes, in deep vertical rocks. cracks and in difference to friends, even in icy cracks. In addition, due to their high resistance and lightness, they can be used as fuses in the resting position. The more generous sizes allow you to increase the Friend range at moderate costs. Our planners have found the system after careful estimations and numerous attempts to stiffen the Tricam tape in a natural way, thus facilitating the positioning of the devices (especially with just one hand) without affecting the function as active protection. How? Simply extend the triple tape layer and create a seam pattern. The Tricam-K. In this way, the tape is not only stiffer near the head, but also more resistant to sharp edges.