SOMATHERM FOR YOU Threaded Coupler PE Brass ACS/Diameter 40-33X42(1.25 Inches)/Thread (Male)

• Brass fitting for PE accompanying mounting pipe: no error due to conical toothed ring made of brass EPDM sealing ring for optimal seal. Anti-scalp: increased
• It allows the installation of a fault fittings PE circuit safely in the mounting direction
• Approved for use in drinking water networks
• Always rotate the PE pipe with a pipe cutter to ensure that the pipe section is clean and deburred. Marks the pipe to detect the length of the pipe coupling in the fitting. During insertion of the pipe into the fitting to the stop. The nut on the fitting body with the help of two buttons without exceeding a torque of 20 Nm.
• It supports a maximum pressure of 20 bar. Maximum operating temperature from -10 °C to + 80 °C

SOMATHERM FOR YOU - correct connection M & acirc; brass for PE pipe D40 - M33 / 42 - technology & agrave; a way of mounting the correct installation of the p>ensure connection. About the item p> Straight screw connection M & acirc; 33/42 (1 1/4 inch) for poly pipe thyl & egrave; do dia & egrave; ext is its laughs 40 - normal and - pressure: 20 bar - is rature temp: -10 & deg; & + 80 & deg. ; C - ACS - GRANT ring is conical and ensure the mounting direction. P> Description: p> Brass suitable for the PE pipe & agrave; single assembly way: no error possible thanks to & acirc; it & agrave; grant the ring is conical and brass. EPDM O-ring for improved sealing dé E E es; optimal Anti-tear R & eacute; sistance m & eacute; mechanical reinforcement & eacute; and p> Application: p> Allows you to install a circuit without errors, fittings PE in the mounting direction. P> Compatibility: p> Approved for use on r & eacute; bucket of drinking water p> Please note: p> Switch the PE pipe with a pipe cutter sufficiently and eacute; ensure that the pipe section is clean and is bavur é and Mark pipe to indicate the length of the nested and î; .. tago pipe in conjunction Although into the E rer pipe into the fitting up to & rsquo; & Grave; the goal is and Pull & rsquo; & Eacute; nut on the fitting body & agrave; l & rsquo; with two cl s without the exc is a tightening torque of 20 Nm p>. Terms of use TECHNICAL p> F & eacute; Siste & agrave; a pressure of maximum 20 bar Temp maximum temperature is -10 °C + 80 °C. p> p>