BSI Accelerator Kicker INSTASET Spray 2oz AND Super Thin Adhesive Glue 1oz Bob Smith Industries

• VALUE TWIN PACK
• Works Best On: Balsa Wood and Ceramics.
• Works Good On: Soft Wood, Fiberglass, Hard Plastics, Water-Resistant and CA Hinges.

Bob Smith Industries INSTA-SET Foam Safe Accelerator Pump Spray (2oz) This is a two fluid ounce Pump Spray bottle of Bob Smith Industries INSTA-SET Foam Safe CA Accelerator. INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerisation. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam. Bob Smith Industries Insta-Cure Super Thin Adhesive Glue CA (1oz) Insta-Cure has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapour that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. Works Best On: Balsa Wood and Ceramics. Works Good On: Soft Wood, Fiberglass, Hard Plastics, Water-Resistant and CA Hinges.