Bond It Tanking Slurry Grey 20Kg Bucket Tub Waterproofer Damp Proofing Masonry Cement retaining walls, and tanks-Grey

• Suitable for use with; brick, stone, and concrete surfaces.
• It is recommended sources of water and damp are removed. A damp proof course should be employed.
• All contact surfaces must be clean and sound, and free from dust, grease particles and loose material or previous coatings. The surface must be prepared using abrasive tools, jet washing or wire brushing and any debris removed with clean water.
• Tap off water pressure where necessary insert a fillet at floor and wall joint.
• Running water and surface defects, such as holes, cracks or fractures should be filled with Bond It PLUG IT. PLUG IT can be over coated with TANKING SLURRY as soon as it is cool and dry to the touch.
• Under normal applications no priming is required. For difficult surfaces Bond It EXTERIOR PREGRIT or SBR ADMIXTURE may be applied as a primer coat.
• Seal around all services and pipes with Bond It GRIPBOND PRO HYBRID SEALANT.
• The water requirement to produce the coating is 5 Litres of clean water per 20Kg of dry material.Pour the required quantity of water into suitable mixing bucket / container. Slowly add the powder to the water whilst continuously mixing with a mechanical paddle / stirrer.

Bond IT Tanking Slurry Waterproofing & Damp Proofing Cement Coating - 20kg Grey Description: A cementitious waterproof coating designed for use below and above ground for cellars, retaining walls, and tanks. Benefits: u Excellent adhesion to most common building materials – see surface preparation. u Water based ‐ safe to apply on damp surfaces. u Easy application ‐ applied by brush. u Resistant to positive and negative water pressure up to 7 Bar. u WRAS approved. Uses High performance; high water resistance (EN 998-1), flexibility, good adhesion and set control in a water mix form. Bond It TANKING SLURRY is a blend of Portland cements, quality graded aggregates and chemical modifiers, which provide a waterproof coating system. Suitable Applications: Tanks, pits and swimming pools; Above and below ground walls and floors; Cellars, underground rooms; Interior spaces, e.g. ducting, party walls, lift shafts; Fish ponds. Coverage One 20Kg bag is sufficient to cover approximately 12m2 . Shelf Life 12 months from date of manufacture shown on the bag, when stored in unopened sacks. Storage Conditions Store in original unopened bags. Once opened the product will absorb moisture from the air and become unusable. Store in a cool, dry place between 5-25°C and protect from frost. Do not place bags on the ground. Disposal of Containers Do not leave empty containers where residue could be harmful to children, animals or the environment. Remove any containers to a central disposal point in accordance with local regulations. Specification Summary Appearance Grey powder Composition Cement plus additives Coverage Dependent on the porosity of the substrate but as a guide 12m2 per 20Kg powder Pot Life 30-50 minutes at 23°C, shorter at higher temperatu