Bond It 12kg Wide Gap Joint Filler Paving Pointing Compound Mortar Jointing Grey

• A single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. A unique blend of polymers and aggregates that bind together chemically.
• On exposure to the atmosphere Joint-Fill forms a stable, solid, mass that is unaffected by the weather once cured. Remains permeable and allows rain water to pass into water course reducing puddling.
• For pointing paving joints 5mm+. Suitable for domestic and commercial installations. Also compatible with most types of paving including natural stone, terracotta, clay, concrete and cobble stones.
• It is cost-effective, eco-friendly and safe to use. Ideal for patios, pathways and any paved areas and is suitable for open porch ways covered areas.
• All joints to be pointed should be dry, free from weeds, dirt or debris. Joints to be pointed must have a MINIMUM width of 5mm and a minimum depth of 25mm. Do not use at temperatures below +10oC.

"A single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. A unique blend of polymers and aggregates that bind together chemically. On exposure to the atmosphere Joint-Fill forms a stable, solid, mass that is unaffected by the weather once cured. Remains permeable and allows rain water to pass into water course reducing puddling. Eliminates the need for sand/cement pointing. For pointing paving joints 5mm+. Suitable for domestic and commercial installations. Also compatible with most types of paving including natural stone, terracotta, clay, concrete and cobble stones. It is cost-effective, eco-friendly and safe to use. Ideal for patios, pathways and any paved areas and is suitable for open porch ways / covered areas. Not suitable for “V"" shaped joints. Simply brush the contents into the joints and leave to set. Open the pack and empty sufficient product to treat approximately 10m2 of paving onto a plastic sheet. Leaving material in direct contact with the slabs may cause staining, particularly in hot weather. Using a soft broom, work the compound into the joints. Compact with a jointing tool. Top up the joint with more material, and then sweep off any excess sweeping at 45o to the joint to avoid disturbing the material. Finish off with a jointing tool to create as smooth finish."