Bona Mix & Fill plus – 5L ; Bona Code: WF 220020001 (Only available in 5L )

• For gaps up to 3 mm wide
• High filling capability
• Good environmental profile, Non-offensive smell
• Quick drying, Good sanding ability
• Anti-corrosive

Product description The Bona Mix&Fill Plus is a waterborne gap filler with a filling capacity equal to solvent- based alternatives. Its high filling capacity, short drying time and good abrasion properties make it an exceptionally reliable product. Under normal conditions you only need to apply it once, which means that you save both time, money and effort. Bona Mix&Fill Plus also offers the benefit of a very nice and natural colouration both with oil and finish. Moreover, add to this the fact that you can work without unpleasant smells and hazardous fumes. Whereas Bona Mix&Fill is used to fill joints up to 2mm in width and other minor defects in wooden floors. Mix and Fill Plus is used to fill joints up to 3mm. Ensure floor is acclimatized to its end-use environment, dry and free from wax, dirt and other contamination. Sand the floor to bare wood and to grit 60-80 (before making the final cut). Temperature of the room and the product must not fall below +13C during application and drying. 1. Shake can thoroughly before use. 2. Mix the product in a container with fine and clean wood dust to a smooth consistency. 3. Apply the mixture across the whole floor using a stainless steel trowel and repeat the procedure if necessary. 4. When the surface is dry, sand off all excess Mix&Fill Plus with a belt and edge sander grit 100-120. Safety Warning Use with care. Do not inhale dust. Responsibly dispose of leftovers to minimize environmental impact.

Use with care. Do not inhale dust. Responsibly dispose of leftovers to minimize environmental impact.