BMUT CT-2000 100 Test Strips Chlorine Dioxide Solution (0-2000 ppm) Quick Test Water

• ✔ [Chlorine Dioxide Test Strips] Purpose: Measure the content of chlorine dioxide in an aqueous solution. This allows you to check the drinking water or the pool/pond. This gives you safety.
• ✔ [Sufficient test strips] 100 x can: the product consists of a plastic box with 100 test strips to determine the chlorine dioxide content in the water.
• ✔ [Easy procedure] The instructions are in German and English. Language: on the label of the packaging the instructions for the procedure is printed so that you can quickly and reliably.
• ✔ [Large measuring range 0-2000ppm] The measuring range is 0-2000 ppm. 2000 ppm is 0.2% chlorine dioxide. If the test strip turns brown/black, the measured value is higher than 2000 ppm.
• ✔ [Example measurement for 0.3%] 29 ml tap water with 1 ml (approx. 20 drops) chlorine dioxide (0.3%) in a separate container. A 30 ml solution is created. If you measure a value of 100ppm with the test strip, then the original test solution has a chlorine dioxide content of about 0.3%.

Product description Why is the product meaningful? Measure the content of chlorine dioxide in aqueous solution. This allows you to check drinking water or pool water. This gives you safety. Product description: The product consists of a plastic can with 100 test strips to determine the chlorine dioxide content in the water. On the label of the packaging is the instructions (English language not guaranteed). The result can also be read directly from the label. The product should only be used for guidance. Measuring range 0 - 2000 ppm. The measurement range is 0-2000 ppm. 2000 ppm is 0.2% chlorine dioxide. If the test strip turns brown/black, the measured value is higher than 2000 ppm. Measuring range greater than 2000 ppm. If you want to test a 0.3% solution, then the following procedure, which is marked by dilution, is recommended: (the suggestion is optimised based on the colour scales on the packaging of the test) 29 ml tap water with 1 ml (approx. Mix 20 drops) chlorine dioxide (0.3%) in a separate container. A 30 ml solution is created. Use the test stick as indicated in the instructions. If you measure a value of 100 ppm (light bluish colour), then the original test solution has a chlorine dioxide content of about 0.3%. If the stick is greener, then the value is below. If the stick is rather dark bluish or even brownish, then the value is above (see colour scale). Directions 1. Keep the test strips in the plastic box until use. 2. Dip a test strip into the solution for 1 second. 3. Shake off excess liquid and wait 60 seconds. 4. Compare the color of the test strip to the color chart on the label. 5. If the test strip turns brown/black, the measured value is higher than 2000 ppm. 6. To test a 0.3% solution, mix 29 ml tap water with 1 ml (approx. 20 drops) chlorine dioxide (0.3%) in a separate container. Use the test stick as indicated in the instructions. If you measure a value of 100 ppm (light bluish color), then the original test solution has a chlorine dioxide content of about 0.3%.