Blacksmith Drift Kit Blacksmith Hammer Eye Drift Tool Set for Forging Tongs, Tomahawk, Axe (3 Pack)

• 【Practical Function】 The blacksmith drift kit is specially designed for professional blacksmiths, knifemakers and beginners to drill holes to handle hand made tongs, hammers, axes, or tomahawks, etc. Finish forming holes quickly and perfectly through hot steel, helping you increase working efficiency a lot.
• 【Built to Last】 The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock successfully when you drive the drift. If the drifts ever bend, simply bring them up to low heating, straighten them with light hammer blowing, and allow them to air cool.
• 【Product Dimension】 Package includes 3 blacksmith drifts in different size to satisfy your demand. The large Tomahawk drift tool with small end size 3/8 x 3/4 inch, large end size 7/8 x 1 1/4 inch. The large hammer drift tool with small end size 5/8 x 7/8 inch, large end size 3/4 x 1 1/8 inch. The mouse ax drift tool with small end size 5/16 x 7/16 inch, large end size 5/8 x 7/8 inch.
• 【Easy Operation】 Drill a series of small holes as close together in the center of the work piece to be drifted. Once the holes are drilled, heat the item and use a cold chisel or similar tool to split the piece. And then heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired measurement.
• 【Satisfaction Guarantee】 If you're not satisfied with the product, simply return it in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us (include pictures if possible) and we will reply in 24 hours.

Package Includes: Blacksmith Knifemakers Tomahawk, Large Hammer and Mouse ax Drift Tool Set (3 Pack) The large Tomahawk drift tool measures 3/8 x 3/4 at the small end and tapers tear drop up to 7/8 x 1 1/4 at the large end. The large hammer drift tool measures 5/8 x 7/8 at the small end and tapers up to 3/4 x 1 1/8 at the large end. The mouse ax drift tool measures 5/16 x 7/16 at the small end and tapers up to 5/8 x 7/8 at the large end. Operation Guide: 1. Drill a series of small holes as close together in the center of the work piece to be drifted. 2. Once the holes are drilled, heat the item and use a cold chisel or similar tool to split the piece. 3. Once split, heat the piece again and drive the drift through the hole. 4. Tap the sides of the work piece while continuing to drive the drift into the work piece until the drift hole gets to the desired measurement. 5. It may take several times of heating to get the desired shape. If your item is defective, incorrect, arrived damaged or any other problems, please send us emails. Describe the nature of the problem (please include pictures if possible). You will be taken care of as quickly as possible.