BizoeRade Reusable Tile Leveling System Kits with 100PCS Tile Spacer and 50 PCS Replaceable Steel Needle for Flat Ceramic Floor Wall Construction Tools, with Special Wrench Easy to Use

• 【TILE LEVELING SYSTEM】Great tools for floor/wall setting. Keep the tile balance on the same horizontal position and prevents tiles from moving while curing. Virtually lippage free, flat surface drastically.
• 【REUSABLE】The Tile Leveling System is reusable, Equipped with special wrench, humanized design and adjust freely that can improves tile installation speed. Wear-resistance, reusable and durable to use.Save your money.
• 【CHARACTERISTICS 】The steel needle design can be replaced to improve the service life of the product and is easy to use in DIY operation.More humane design .
• 【APPLICABLE RANGE】The tile levelers are suitable for 3mm - 16mm thickness of the tile and suitable for 2mm - 6mm tile gaps. Recommended the tile gap should be greater than 2mm above just can insert T-shaped needle. Remove the levellers within 6 hours from the time of paving tile or before the tile adhesive is completely dry.
• 【WHAT YOU GET】1 x Wrench, 25 x Tile Levelers,25x Replaceable cylinder,50 xReplaceable T-Steel Needle, 100 x Tile Spacers; We offer 30 day money back service for any quality issues. If you have any question on this item, please feel free to contact us.

<b>Specifications:</b><br> Material: PP+stainless steel<br> Leveler height: 73mm / 2.9in<br> Leveler bottom diameter: 36mm / 1.4in<br> Applicable tile gap: 2~6mm / 0.1~0.2in<br> Applicable tile thickness: 3~16mm / 0.1~0.6in<br><br> <b>Features: </b><br> Made of environmentally friendly materials, can be reused to protect the environment and save money.<br> Keep the tile balance on the same horizontal position.<br> Virtually lippage free, flat surface drastically. <br> Easy to use for DIY operation, refrain tiles from moving while curing.<br> Reduce the need for grinding and polishing. <br> Improve tile installation speed and reduce installer fatigue/stress. <br> Steel needles can be replaced to ensure leveling effect and more humane.<br><br> <b>Operating Instructions:</b><br> 1）lay the first piece of brick, the joints must be between 2mm-6mm, and close to second bricks; <br> 2）Insert the T-pin along the crack, then rotate it 180 degrees, clamp the T-pin at the bottom of the two bricks and tighten the adjusting cover so that the two bricks are in the same level; <br> 3)Rotate the nut cover and press down the ceramic tile to make the two tiles leveling.<br> 4）Before the cement or tile glue has completely dried up (usually no more than 6 hours), rotating the nut cover in the opposite direction again ,180 degrees rotation to draw the metal needle.<br> 5）Clean and dry storage for reuse. <br> <b>Note:</b><br> 1.It is recommended to leave a gap of 2mm or more.<br> 2.It is recommended to open the recycling within 6 hours from the paving time, or the cement, tile brick glue is completely dry before disassembling, and the recycling effect is better.<br><br> <b>Package list:</b><br> 1 x Wrench<br> 25x Tile Leveling System Tools<br> 25x Replaceable Cylinder<br> 50 x Replaceable Steel Needle<br> 100 x Tile Spacers<br>