Authentic Handmade 4oz Aluminum Injector for Soft Plastic Plastisol Bait Shapes DIY Baits

• Volume: 120ml (4 US Fluid Ounce). This volume is a perfect balance between comfort and verstyle. You can fill large single-cavity moIDs or medium-sized multi-cavity moIDs without moving a bulky injector.
• Material: Aluminum Aluminum alloy is recommended as a lightweight and durable material, suitable for moID injectors.
• Rubber sealing rings. There are two rubber sealing rings to prevent the plastisol from leaking and to create more pressure when pumping.
• Injection port: 5/8" injection This diameter has become a standard over the years for soft plastic baits. It is an optimal size to create a targeted pressurized plastisol flow.
• It is recommended to put a marking on the piston rod to determine the safe amount of pressure, which can be applied to the piston, without accidental exposure of the cap.

Fishing bait moIds are used to produce DIY soft plastic baits. MoIds are made from heat resistant engineered stone. Plastisol (soft plastic) needs to be heated to 180 degrees Celsius (356 F) and injected into the moId using injector. When making baits you may add color pigments, attractants, glitters etc to achieve the desired look of the bait. Oil based greasing or cooking spray can be used to lubricate the moId prior to casting. Although it's not mandatory, it simplifies the bait extraction process and give a nice glossy look and needed scent to the baits. Attention: Pull the handle up very strongly before use, as the grease hardens in the cold the plastic handle may differ from that shown in the photo, have a different shape