Authentic Easy Wood Tools Ci7-NR Patented Negative Rake (12407NR) Carbide Replacement Cutter

• Authentic Easy Wood Tools Ci7-NR Patented Negative Rake, Super Sharp Diamond Carbide Replacement Cutter and are designed for use with EWT Mid-Size Micro Detail and our Easy Micro Detailers; comes with replacement 4-40 screw
• EASY WOOD TOOLS was the first wood turning tool manufacturer to offer NEGATIVE RAKE (Patented) CARBIDE CUTTERS for turning resins, acrylics and extreme hardwoods. Perfect for final passes on any type wood, end grain and man-made materials which leaves a great finish…which equals LESS SANDING.
• Our tools are designed to be used with our own carbide: we have extremely tight tolerances, and they work best when they work together. We make it easy to know which carbide fits which tool, too, with our tools and cutters specially marked. Each cutter comes with a new mounting screw.
• Please visit and shop the complete line of EASY WOOD TOOLS and accessories on our AMAZON STORE – just click on Visit the Easy Wood Tools Store listed right under the TITLE of this product.
• Designed and Manufactured 100% in the USA

This is an authentic, made in the USA, Easy Wood Tools Ci7-NR Patented Negative Rake diamond shaped carbide cutter designed to fit the Mid Size Micro Detailer and Micro Detailer. Negative rake cutters were specifically designed to turn man-made acrylics/resins, hardwoods/exotics as well as end grain...produces better finishes with virtually no catches and/or chips. Authentic EWT cutters have the optimal 3G’s of Carbide - Grade, Grind, and Geometry. 1) The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particles are referred to collectively as the ‘grade’. There are literally hundreds of thousands of conceivable grades and no ‘one grade’ of carbide is suited for all applications – whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in EWT carbide cutters yields a cutting edge that is both the keenest and the most durable grade for woodturning available today. 2) The Right Grind: EWT grinds all of their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. EWT uses the proper grit diamond wheels to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface. All the cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process, or once again micro chipping of the cutting edges will occur if the proper sequence is not followed. 3) The Right Geometry: EWT grinds all their cutters to the correct angles and geometries specifically for woodturning. This produces an edge that cuts both cleanly and safely for all skill levels. Only when grade, grind, and geometry are in harmony will you have a cutting edge for high performance woodturning.