Atkinson Oil Co. Metal Working Kit | Cutting Fluid 100 ml & Tapping Compound 30 g – Smoother Drilling/Reaming & High-Load Thread Cutting, Longer Tool Life

• TWO-PART SOLUTION – Light Cutting Fluid for drilling, reaming, milling and sawing; concentrated Tapping Compound for severe thread cutting.
• LOWER FRICTION & HEAT – Helps tools cut cleaner with less chatter, supporting tighter tolerances and better finish.
• MAXIMISES TOOL LIFE – EP/anti-wear performance at the cutting edge helps reduce galling, seizure and breakage.
• CLEAN, CONTROLLED APPLICATION – 100 ml drip-tip bottle for neat fluid dosing; 30 g paste for precise, mess-controlled tapping.
• DIY & PRO SHOP READY – Compact sizes for bench, site and mobile kits—ideal for steels and common workshop metals.

Make cutting and threading straightforward with the Atkinson Oil Co. Metal Working Kit. Use the Cutting Fluid (100 ml) to reduce friction and temperature in drilling, reaming, milling and sawing, improving feed control and finish while extending tool life. When loading peaks, switch to the Tapping Compound (30 g) for spiral-point, spiral-flute and fluteless taps, where a concentrated boundary film prevents galling and helps threads form cleanly. Together they deliver smoother cuts, fewer jams and consistent, professional results. How to Use Cutting Fluid – 100 ml Secure workpiece and choose correct speed/feed. Apply a small amount directly to the cutting zone (bit/reamer/saw line/mill path). Re-apply on longer cuts to maintain a wet film. After machining, wipe parts clean before deburr/finish. Tapping Compound – 30 g Ensure tool/work is stationary before application. Use as supplied (neat): apply a thin smear to the tap or into the hole. Do not apply to rotating tools. Cut threads with appropriate technique; back off periodically to break chips. Clean components after tapping; re-apply for subsequent holes. Caution Use suitable PPE and ensure good ventilation. Keep away from ignition sources. For certain non-ferrous alloys, test first—some chemistries can stain sensitive metals. Do not apply the tapping compound to rotating tools. Keep out of reach of children. Avoid eye contact and prolonged skin exposure. Store sealed in a cool, dry place. Dispose of waste fluids and wipes responsibly.