ATEN PE8216 | IP power strip | 16 port | 16 A measured value (single port measurement): current parameters, sensor port: temperature, humidity

• Remote controlled power control (on, off, off and power) through individual sockets
• Displays current, voltage and kWH in real time in a browser-based interface for monitoring at socket level (PE8108 / PE8208)
• Network interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, Auto Sense, Ping, Telnet
• Power On Sequence - Users can set the power-on sequence and delay time for each port to enable devices to be turned on in the correct order

Intelligent 0U PDU power management unit with 16 ports, measurement decrease per socket / PDU level and switching functions (14 x C13, 2 x C19). It provides safe, centralized, intelligent management of the power supply (power on, off, restart) of the IT systems (servers, storage devices, KVM switches, network units, servers, all the devices etc.) in the Data centre as well as the possibility of monitoring the environment controls in the data centre via sensors*. Power distributorSpace-saving design for rear 0U rack mountingOutput side sockets according to IEC (14 x C13) (2 x C19) Front LED display with 3 x 7 segments for power/IP address of PDU/power strip. Remote users can track the status of the PDU/power strip via the web browser. Function for safe shutdown of the connected systems Separate circuits to power the device and output side sockets - the user interface is available even after the circuit breaker is triggered by overload, the power supply via TCP/IP and the built-in 10/100 Mbps Ethernet portNetwork protocols: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNP, S, Automatic DetDetDetDetDetingPower management software for the eco PDU - eco sensors. Supports SNMP Manager V1, V2 and V3 operation. Monitoring local and remote socket outputs (on, off and restart) for individual sockets. Supports multiple management options of power supply. Reactivate when LAN activity, system after restoring the power supply, stop power supply, switching sequences - the switch-on z and a deldeldeldelCan be programmed independently for each port and booted the corresponding devices in the correct order. Easy to set up and operate via web browser. Support the most common web browsers (IE, Mozilla, Firefox, Chrome, Safari, Opera, Netscape). Real-time clock, so that the time programming works even in the event of a power failure. Up to 8 user accounts, and 1 power strip