Arducam for Jetson IMX477 HQ Camera Board, 12.3MP Camera for Nvidia Jetson Nano/Xavier NX

• A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040.
• Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
• Plug-and-Play - You don’t need any hardware modification to work with jetson platform. Just a driver needed. More convenient than RPI official HQ cameras.
• 4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
• Note：1. It can't work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) 2. This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.

Arducam just released this High-quality camera module for Jetson Nano/Xavier NX. You can use this camera module on Jetson Nano/Xavier NX natively with ISP features. No hardware modifications required, just install the driver and you are good to go. SPECIFICATIONS – Sensor: IMX477 – Optical Format: 1/2.3″ (diagonal 7.857mm) – Resolution: 4056(H) x 3040(V) 12.3MP – Pixel Size: 1.55um x 1.55um – IR Sensitivity: Visible light – Interface: 4-lane MIPI CSI-2 – Default Lens Mount: CS-Mount – Frame Rate: (depends on the target platform, maximum fps limit might apply) 1920×1080 @ 60fps 4032×3040 @ 30fps – Board Size: 38mm×38mm – Hole Pitch: Compatible with 29mm, 30mm, 34mm PACKING CONTENTS 1pcs 12.3MP IMX477 camera board with dust cap for Jetsons 1pcs 11.8"(30cm) camera cable