AQUASPARKLE RAPID SHOCK 0.5kg FAST DISSOLVING SHOCK TREATMENT FOR HOT TUBS/SPAS

• AQUASPARKLE RAPID SHOCK 0.5kg FAST DISSOLVING SHOCK TREATMENT FOR HOT TUBS SPAS
• Brand : AQUASPARKLE
• Product type: POOL SPA WATER TREATMENT

Product description Instructions: Maintain Ph In The Ideal Range Of 7.2 7.6. If The Layer Is Not In This Area, Adjust. Maintain Free Residual Chlorine Or Bromine In The Range Of 3 5 Mg L Ppm . Freshly Filled New Spas Or Thermal Baths That Have Been Drained For A Period Of Time Require An Initial Dose Of 20 Mg L Ppm Free Chlorine For At Least 2 1℉2 Hours. If The Water Temperature Is 20°C Or Higher, This Product Can Be Carefully Transferred Directly Over The Spa Water Surface. If In Doubt, Dissolve This Product In A Clean Plastic Container At A Maximum Rate Of 10 G Of Product Per 0.2 Gallons 1 Liter Of Clean Warm Water. Stir Well To Ensure The Product Is Completely Dissolved. Carefully Add The Resulting Solution To The Spa With The Pump S On. After Using This Product, Spa Water May Become Temporarily Cloudy, Allowing Filtration To Run Until It Clears. Allow Free Chlorine Or Bromine Levels To Decrease To 5 Mg L Ppm Or Below Before Continuing Spa Use. Directions Maintain pH in the ideal range of 7.2-7.6. Maintain free residual chlorine or bromine in the range of 3-5 mg/L. For freshly filled or drained spas, use an initial dose of 20 mg/L free chlorine for at least 2 hours. Dissolve the product in clean warm water if necessary and add the resulting solution to the spa with the pump on. After use, allow filtration to run until the water clears. Ensure free chlorine or bromine levels decrease to 5 mg/L or below before continuing spa use.