Aquasparkle Hardness Plus - Calcium increaser for spas & hot tubs

• Corrects Calcium Hardness: Maintain ideal levels for water balance and prevent issues like scale formation and filter calcification.
• Water Softness: Achieve the perfect balance between soft and hard water, essential for optimal spa performance.
• Prevents Corrosion: Protect spa components from damage caused by corrosive water with proper calcium hardness levels.
• Reduces Foam: Say goodbye to unwanted foam in your spa water, providing a more enjoyable experience.
• Prevents Scale Formation: Keep your spa equipment free from scale build-up, extending their lifespan.

Introducing Calcium Hardness Plus, a must-have solution for maintaining the optimal calcium hardness levels in your spa water. If you've noticed that the calcium hardness of your spa water is less than 100mg/l, then it's time to turn to Hardness Plus to bring it up to the recommended range.Understanding Calcium Hardness: Calcium hardness, also known as total hardness, refers to the measure of how hard or soft the water is. The hardness level can vary based on the source of your water supply. For instance, regions like Scotland and South Wales may have very soft water, while areas like the South East often experience very hard water. The hardness of water is influenced by the presence of mineral salts, primarily calcium, which are dissolved in the water. The higher the concentration of salts, the harder the water becomes.Common Problems Associated with Incorrect Calcium Hardness Levels:- Low Hardness: Can lead to corrosive water, surface etching, and foam formation- High Hardness: May result in scale formation, filter calcification, cloudy water, and staining issuesIdeal Ranges: It is recommended to maintain the calcium hardness at less than 100mg/l for low hardness and above 200mg/l for high hardness. If your spa water falls below the 100mg/l threshold, using Hardness Plus becomes crucial to bring it back to the desired level.How to Use: The dosing rates for increasing the hardness are straightforward. For every 1,000 Litres of water, you would need:- 15g of Hardness Plus to increase hardness by 10mg/l- 38g of Hardness Plus to increase hardness by 25mg/l- 76g of Hardness Plus to increase hardness by 50mg/lIf your spa water's calcium hardness surpasses 200mg/l, consider using ScaleAway to prevent scale deposits in the filter, heater, pipework, and spa surfaces.Dosage Guidelines for Reducing Hardness: Should you need to bring down the hardness levels, use 25ml of ScaleAway for every 1,000 Litres of water. Repeat this process every 24 hours until the calcium hardness l