ApexPine 24 Pcs Glow-in-Dark Anti-Slip Strips for Stair Steps

• Slippery stairs and low lighting can increase the risk of trips during night and early morning use. These strips combine a textured anti-slip surface with a glow-in-dark design, adding extra foot grip and making step edges more visible in dim conditions for home stair areas.
• Permanent anti-slip installations require professional fitting and high cost for simple home upgrades. Made of PEVA with a self-adhesive backing, these strips suit smooth, flat, non-porous surfaces. Always clean and fully dry the area before installation for reliable adhesion.
• Roll-format anti-slip tape needs measuring and cutting, adding extra work to small home projects. Each strip is pre-cut to 20 x 2cm, so no additional cutting is required during installation, making them ideal for quick DIY stair upgrades around the home.
• Small packs of stair strips run out quickly when covering a full flight of stairs and multiple walkways. This 24-piece pack provides enough strips for most standard home staircases, ramps and small outdoor walkways, covering multiple slip-prone areas across the property.
• These strips work for indoor stairs, outdoor steps, pool edges, ramps and deck areas. They are designed for light-duty casual use only; inspect regularly for wear and replace promptly when damaged to maintain reliable performance.

A practical home safety accessory, these glow-in-dark anti-slip strips add traction and low-light visibility to stairs, ramps and slippery walkways. Each pack contains 24 fluorescent green PEVA anti-slip strips, each measuring 20 x 2cm. The textured surface helps improve foot grip on smooth surfaces, while the luminous material glows softly in dim conditions after absorbing natural light, making step edges easier to locate in low light environments. Installation requires no specialist tools. Thoroughly clean and dry the target surface, peel off the backing paper, position the strip flat, then press firmly from centre to edges to expel air bubbles. Allow 24 hours for full adhesion before regular foot traffic or exposure to water. Please note these strips are light-duty slip resistance accessories only and do not guarantee against falls or trips. They only work on smooth, flat, non-porous surfaces; do not apply to rough, porous or uneven surfaces. For best luminous effect, ensure the strips receive regular natural light exposure. Replace periodically as the adhesive and texture wear with use.