Aosnom Air Blower Seal One Way Non Return Smart Valve for Coleman Lay-Z-Spa, Repair Hot Tub Water Leakage

• This kit is compatible with all Lay-Z-Spa AirJet models, including 54112, 54124, 54129, 54131, 54145, 54155, 54176, 54185, 54186, 54190, 54295, 54297, 90443, 90437, 90363, 13804, 600xx, and many other variants.
• Includes: 1 umbrella valve, with retrofit plastic housing that installs at the front of the air inlet tube 1 air inlet seal (connector “A”)
• Compatible with both 2nd generation (egg shaped) and 3rd generation (square shaped) heater/pump units.
• The umbrella valve presses into the air inlet tube on the spa liner. It uses the exact same silicone umbrella valve that the spa uses, but moves it to the front of the tube for easy cleaning and service. It is not necessary to remove or replace the old umbrella valve at the back of the tube. The new one just stacks on top and provides the same function. It is compatible with both older spas (shallow tube) and newer spas (deep tube)
• IMPORTANT: The umbrella valve housing MUST be secured to the air inlet tube by connecting the heater/pump unit on top of it, as shown in the photos. If the housing is not secured and left unattended, it could become dislodged by water pressure and flood the area.

Silicone seals to fix water leaks related to the air bubbler/blower, For Coleman Lay-Z-Spa AirJet hot tubs. Includes: 1 umbrella valve, with retrofit plastic housing that installs at the front of the air inlet tube 1 air inlet seal (connector “A”) The umbrella valve presses into the air inlet tube on the spa liner. It uses the exact same silicone umbrella valve that the spa uses, but moves it to the front of the tube for easy cleaning and service. It is not necessary to remove or replace the old umbrella valve at the back of the tube. The new one just stacks on top and provides the same function. It is compatible with both older spas (shallow tube) and newer spas (deep tube). This kit is compatible with all Lay-Z-Spa AirJet models, including 54112, 54124, 54129, 54131, 54145, 54155, 54176, 54185, 54186, 54190, 54295, 54297, 90443, 90437, 90363, 13804, 600xx, and many other variants. Compatible with both 2nd generation (egg shaped) and 3rd generation (square shaped) heater/pump units. IMPORTANT: The umbrella valve housing MUST be secured to the air inlet tube by connecting the heater/pump unit on top of it, as shown in the photos. If the housing is not secured and left unattended, it could become dislodged by water pressure and flood the area. Note: OEM designed the umbrella valve to reduce the flow of water to a slow drip or trickle. But even with the factory-installed valve on a brand new spa, there will be a small amount of leaking. This is normal. That is why there are additional seals between the liner and the pump and inside the pump, and a cap for when the pump is disconnected. Use of the Manufacturers trade names and logos are the registered trademarks of their respective owners. Any use of the Manufacturers brand name, part numbers or model designation for this product is made solely for purposes of demonstrating and for identification compatibility and are displayed for descriptive purposes only. Use of them does not associated with, imply any affiliation or endorsement by any manufacturer.