Allparts BP-2005–010 Tremol-No Chrome

• The Tremol does not support ON, OFF and DIVE ONLY modes
• The tremolo tremol type is designed to work with tremolo blocks that do not have a flat base, such as round or beveled blocks (to allow more tremolo rides)
• Please check your TREMOLO block (as shown in the photos) and the number recommended by TREMOL in the description below.
• Design allows for solid attachment of the Tremol-No Receiver section to the tremolo block using the spring hole in the tremolo block

The Allparts Tremol-No is a patented device that is attached to an electric guitar equipped with a trimolo/vibrato unit. If you break a string or let the bass E to D tune, the other strings will stay tuned. Allows guitarists 3 playing options: Three in this position their three-molo works as normal. You can raise or lower the pitch of notes with the three-molo. -Trimolo off: In this position, you will enjoy the benefits of a hard-tail bridge, where the threesome does not move at all; without lowering or raising the tone of a note through the threesome, and the other strings stay in tune if you break one of them. - Threesome dive mode alone - in this Position, you can only lower the pitch of notes. Tremol-Not comes in 3 versions: Type 1 pin (sold on this page) is designed to work with three-molo blocks that do not have a flat base, such as those that are rounded or beveled (to allow more three-molo trips). The diameter of the 1.5 mm spring hole is necessary to use the pin type. Recommended by Tremol Not for the following models: Ernie Ball/Music Man Trimolos, Fender Standard 2 Screws/Pole, Fender Standard 6 Screws, G&L Three-molo Systems (new screw holes required), Godin Tremolo, Gotoh 1055, Gotoh 1088, Gotoh 1099. Gotoh 510FT, Ibanez FAT 10, Wilkinson VS-100C, Wilkinson VS-100G, Wilkinson VG-300, Wilkinson-Gotoh VSVG, Fender Vintage Style (6 Screws), Kahler (Traditional 2500, 2710 Killer, 2720 Spyder, 2750 Steeler), Schall Model er 370, 371, 1370, 5370, 5371, 15370, 5375, 5376, 15373, TRS, TRS-101, ABM Fulcrum 2-large type of clamp is designed to work with three-molo blocks that are thicker than 10 mm in Strats, PRS and Three Enhanced FR Blocks. The 3 small clamp type is designed to work with three-molo blocks up to approx. 9 mm thick. This includes almost all trimolos Floyd Rose and FR.