AllisWay Dinghy Adhesive, PVC Adhesive, Waterproof, PVC Glue Inflatable Boat, PVC Adhesive Sup Board with Brush for Repairing and Gluing Inflatable Mattresses, Pool Boats, Paddleboards, etc

• SOLID PROTECTION Will not crack at low temperatures or come off in the sun. Shock and abrasion resistant. Repairs seams of swim rings, cracks in inflatable sofas and holes in wellies with just one adhesive
• Excellent quality: after curing, inflatable boat glue expands with the PVC and contracts, maintaining shape and strength. The repaired area can be bent without peeling off. This makes PVC adhesive pool perfect for repairing strongly deformed areas such as seams of inflatable beds and inflatable boat valves
• Easy to use: the integrated brush head of PVC adhesive inflatable boat allows precise adhesive application and covers the edges of holes with a single brush stroke. Even beginners can perfectly repair irregular cracks
• Household essentials: The 100g tin is enough for everyday use. Keep a can in your toolbox so you don't have to worry about leaks on your outdoor gear
• Wide applications: PVC adhesive is suitable for bonding plastics such as PP, PE, PVC, ABS, acrylic and EVA foam. It can also be used for bonding rubber, ceramic, glass, pearl thread, metal, fabric, sponge, paper and wood

Weight: 2.5 kg. Viscosity (mPa-s/25°C): 6000 Solid content: 46 ± 2%. Peeling strength: > 50N/25mm Initial curing time: 5-10 minutes Curing time: 24-48 hours Applications: Suitable for plastics such as PP, PE, PVC, ABS, acrylic and EVA foam. Suitable for bonding rubber, ceramic, glass, EPE foam, metal, fabric, sponge, paper and wood. Application: 1. Clean the surfaces to be glued and make sure they are dry, free from oil, dust and other impurities. 2. Shake the bottle lightly before use to mix the adhesive components. 3. Apply an appropriate amount of glue evenly to the surface of the material to be bonded. 4. Apply pressure with suitable tools to ensure the adhesive penetrates the surface and improves adhesion. 5. Allow the adhesive to cure completely. Avoid moving or damaging the materials during the curing time. *Cured: The initial curing takes 5-10 minutes, full curing 24-48 hours. Precautions: 1. Use in a well-ventilated workplace. 2. Close the bottle cap tightly immediately after use to prevent evaporation or drying out of the adhesive. 3. In case of accidental contact of the adhesive with eyes or skin, rinse immediately with water and consult a doctor if necessary. 4. Store this product in a cool, dry and well ventilated place. Do not store upside down. 5. Keep out of reach of children.