ALITOVE WS2811 Individually Addressable RGB LED Pixel for Screen Wall Advertising Sign Board IP68 Waterproof 5V Round 500pcs Red, Green, Blue

• Individually Addressable. Each LED can have its own color and brightness. You can control each LED individually and set it to any color or animation you want.
• It can be compatible with Arduino Raspberry Pi T1000S K1000C etc. It can also be controlled by pre-programmed controllers such as SP105E SP110E bluetooth controllers, SP108E wifi controllers and SP106E SP107E music controllers.
• IP68 waterproof. Each RGB LED and controller chip is sealed in silicone. They are weatherproof and rugged. You can put them outdoor, even underwater.
• Each strand has two 3-pin JST SM connectors so you can connect multiple strands in a row, just watch for how much current they want. Each pixel can be cut off. So you can shorten or extend the distance between two pixels.
• They're typically used to make outdoor advertising signs, led screen, led wall, advertising board and widely applied to hotel, KTV, bars, wedding, party atmosphere lighting.

Parameter Model: WS2811 LED pixel Light source: F8RGB*1 IC Model: WS2811 IC Quantity: 50 LEDs / strand LED Shape: Bullet shape Color: full color, 24-bit Gray level: 256 Size: Please refer to the picture Drill hole diameter:12mm Length: 3.5m/strand Operating voltage: DC 12V Power: 0.3W/LED (15W/Strand) Waterproof: IP68 waterproof Connection: Red: +12V; White: DATA; Blue: GND. Kindly note 1) It comes without power supply and controller. You'll need a controller such as an Arduino to use them. 2) The work voltage of the LED string must be 12V DC. Otherwise, it will be burnt out. 12V 1.25A supply can drive one strand (50 pieces). 3) Please refer to the fifth prodcut image, it shows the input port.