AL-PD093G Refrigerator Water Filter Compatible with Samsung DA29-00003A DA29-00003B DA29-00003F DA61-00159A-B

• ✅ Pure Drop refrigerator filter compatible with Samsung DA29-00003B DA29-00003F DA29-00003G (older model)
• ✅ Previously, most Samsung owners with these cartridges would have used the version ending with an 'A, B or G' suffix. The new cartridge looks slightly different
• ✅ Enjoy better drinking water for up to 300 gallons or 1,137 liters. Replace your filter every 6 months for optimum performance.
• ✅ WQA Certified to Reduce Chlorine and Sediment Designed for refrigerators that do not have an integrated filter
• ✅ *All trademarks remain the property of their respective holder(s) and are used for compatibility information only. This product is not manufactured or sold by Samsung

PureDrop PD093F Comparable Fridge Filter Samsung DA29-00003B will reduce harmful contaminants and notably improve the quality of your water and ice. Why suffer with mediocre water quality when you can add the DA29-00003B to your basket now and have better tasting coffee and tea in just a few clicks. The AL093B fridge filter fits Samsung fridges with a short round filter The DA29-00003B is a new and improved version of the older DA29-00003A and removes significantly more contaminants The Aqualogis filter fits in the same receiver sockets as the DA29-00003A NSF standard 42 & certified to reduce a broad spectrum of contaminants Installation and Replacement Procedure For The PD093f Fridge Water Filter: Slowly turn the old cartridge 1/4 turn to the left (counterclockwise). Pull the filter straight down and discard (the water will shut off automatically). Remove the protective red cap from the new filter. Push the new filter up into the filter cover until the filter stops. Turn the filter 1/4 turn to the right (clockwise) to lock it into place. You will feel a stop and the locked symbol should now be lined up with the indicator line above. Do not over tighten. Run water through the dispenser for 5 minutes to purge the system. Check the filter area for leaks. Reset the “Filter Indicator” light (if your fridge has one) by pressing and holding the Ice Type and the Child Lock (or Moisture Control)buttons simultaneously for 3 seconds (the light should turn green). Note: If you hold these buttons for more than 5 seconds, you’ll cancel the reset process. If this happens, just release the buttons and start over.