LED Strip Driver (WS2812/SK6812), with 3 pin WAGO Connector, USB-A, and ICS43434 Microphone. Home Assistant Compatible, pre-Loaded with WLED

• Very small LED strip controller - designed to work with common RGB or RGBW addressable LED strips (WS281X/SK6812) style.
• Can be powered from USB and power the strip 5V if enough current from USB, or powered from strip (5V/12V/24V) - don't connect USB at same time.
• Includes a TDK ICS 43434 microphone for sound reactive effects. Can be loaded with other software over USB, such as ESPhome, where it also makes for a very compact voice assistant control for Home Assistant.
• A key feature is no subscription, no account, no cloud. Works on your home network, compatible with Home Assistant.
• This is a hobbyist circuit board, a component, an assembled PCB - with no leads or case. Snap off excess PCB panels. You will need a spot of glue to attached extra panel to make USB-A connector correct thickness. LED strip not supplied. You can easily load different code via USB, ESPhome, WLED, etc, or your own code over the USB connector using esptool.

This is a tiny circuit board to drive LED strips (WS2812/SK6812 style). 3 pin push down WAGO connector for easy connection to LED strips. Plug in USB-A connector. Can be loaded with other software such as esphome, or your own code. See led.revk.uk for more details.