AHMI Silicone Mould Keycaps DIY Keyboard Moulds Cherry MX Mechanical Keyboard Compatible

• HIGH QUALITY MATERIAL: All silicone resin molds are easy to use and clean. They are all smooth, flexible and durable. Due to these outstanding properties, they are very easy to demould, and therefore have several choices. You can make different shapes of craft from resin molds that you like.
• For keyboard with cross axle only: Equipped with a molding cover for positioning the horizontal shaft, our resin mold with key cap only fits the mechanical keyboard with transverse axle.
• EASY TO USE: Easy to use, shape, shape and clean.
• Usage: silicone molds allow you to make your DIY special keyboard or keyboard holder. Use fillers for different themes to define your own DIY keyboard.
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

When the keyboard is installed, it is found that it is too tight. You can use a hair dryer to blow hot air against the cross section of the keycap. After the holde is softened, adjust it. If it is too loose, you can apply a trace of glue to the cross hole with a toothpick to reduce the gap and increase friction. Specification Type: epoxy mould. Material: silicone. Colour: as shown in the picture. Size: Strap width: 22 - 35 mm; length: 35 - 65 mm. Locking button: 35 mm; length: 68 mm. Spacebar width: 41 - 45 mm; length: 145 - 150 mm. Ctrl Width: 23-43mm; Length: 65-68mm Backspace width: 23 - 43 mm; length: 23 - 68 mm. Cat paw: 70 x 53 mm. Package includes: 1 keycaps silicone moulds. Warm tips: As the size is measured by hand, there may be a small error, please understand. Due to the difference between light and display, the colour of the product depends on the actual situation.