Active Film Safety & Security Window Film/Clear Glass Protection / 99% Uv Rejection 10m x 100cm (40")

• Conforms to BS6202 Class B (the same as safety glass) Self Adhesive, optically clear.
• Stops over 99% of harmful UV which reduces the effects of fading.
• Safety & Security Window Film / Clear Glass Protection / 99% UV rejection, sold per metre
• Easy Diy Install, with basic tools. Self-adhesive, No Glue Needed
• Comprehensive fitting instructions provided with your order.

100 micron security film;can be applied to any flat glass surface to increase the structural integrity and security of home, office and vehicle glass. Our 100 micron security film creates a 'safety net'which holds shards of glass in place upon impact. This makes it safer for occupants and reduces the risk of vandalism and burglaries.This film is an inexpensive way to upgrade any window and is used worldwide in banks and offices. The film is easy to install, and can be cut to any shape or size. It is completely clear so does not obstruct vision from inside or out.Will be dispatched in 24hrs of purchase. Safety Window Film is ideal for external facing windows, internal partitions, glass staircases, offices, bathrooms, shower screens etc. Full fitting instructions supplied with your order. Professional quality - as used by professional window film fitting companies. Non Fade, Easy DIY install. Self Adhesive Film Easy to cut & trim to size Allows natural light through the film Please note if you order multiple quantities, we will send as one continuous roll. FITTING INSTRUCTIONS Tools: - knife - Spray bottle containing water with a few drops of washing up liquid ‘Slip Solution’ - Squeegee Method: 1) Thoroughly clean the window the film will be applied to. 2) Cut your film to size of the window, adding an extra 2cm to the width and height. 3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart. 4) Spray the glass with the Slip Solution. 5) Apply the adhesive side of the film onto the glass and slide into position. 6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film 7) Trim off any excess film using the knife.