ABUS Door Fitting SRG92N F1 - for Front Doors - with Door Handle Inside and Door Knob Outside - for Doors with Narrow Frame - Aluminium

• Safety: door protection fitting is used to protect and stabilise the mortise lock and the door cylinder as well as to open and close the door
• Details: distance between door handle (hole centre) and keyhole meets the standard of 92 mm, square 8 x 8 mm (cross section), weight 1074 g, colour aluminium
• Easy to install: thanks to the adjustable cams, the existing drill holes can be used when retrofitting a fitting. Spacings of the cams can be adjusted to standard drill patterns. Cylinder overhang: the protrusion of the built-in cylinder should be 12 mm
• International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

ABUS SRG92N Door Fitting - Safety for Narrow Frame Doors A protective fitting is used to manually open and close a door. On the other hand, it also fulfils an important safety aspect. The fitting makes it difficult for the burglar to get to the cylinder. The door protection fitting SRG92N from ABUS helps you optimally secure your front door. As the fitting is particularly long and narrow, it is well suited for use on doors with a narrow frame profile. Whether you prefer the white, aluminium or stainless steel look, you have the choice when colouring it. The distance between the door handle and the keyhole is 92 mm. As this measure is standardised for front doors, the door fitting fits all German house entrance doors. For room doors, on the other hand, 72 millimetres are considered the standard. The installation of the SRG92N is straightforward. This is due to the adjustable cams in the inner shield. These are so variable that they can be adjusted to standard drill patterns. For you, this has the advantage that you can take over existing drill holes when retrofitting the fitting and do not have to drill any more. Product advantages at a glance: Standard meets for house entrance doors: square pin = 8 mm, distance = 92 mm between drill holes for door handle and cylinder. Width of 36 mm is suitable for doors with narrow frames. Long cover shield. Suitable for door thicknesses of 57 - 65 mm. Concealed mounting screws. Automatic reset mechanism of the door handle in the inner plate. Easy to assemble