ABUS 210358 door protection fitting HLS 214DD F1, with handle on both sides, aluminium 21035 (packaging may vary)

• Standard door protection fitting for house entrance doors
• on both sides pusher (pawl)
• Increased tear-off protection through stable cams and internal fittings
• Distance 92mm, square pin 10mm
• Color aluminum
• handle (latch) on both sides
• Increased tear-off protection due to sturdy cams and internal screw connections
• distance 92mm, square pin 10mm
• color aluminum
• KLS suitable for door thicknesses of 52 - 67 mm.
• NOTE Please check the dimensions before any purchase.

Protective fitting for front doors Unprofessionally secured doors are immediately recognizable as an easy target for burglars. The cylinder protrudes far beyond, and often the fitting can also be easily unscrewed. It makes burglary easy not only for professionals. ABUS Security fittings protect both the mortise lock and the door cylinder. They are designed according to the principle of layered construction. The protective fittings can be used universally, whether for left-hand or right-closing doors. The protective fitting ABUS HLS214DDF1 is specially designed for house entrance doors and has a long plate with a length of 250 mm. Shield thickness 15 mm. Technology Protective fitting for house entrance doors with a square of 10 mm and a distance of 92 mm Long cover plate Handle/handle set with door handle on both sides Box contents Outside plate Inner plate Two door handles Square pin Three screws M6 x 70 mm, three screws M6 x 80 mm hex wrench drilling template assembly instructions ABUS Level 5 required assembly tool drill drill Ø 10.0 mm Phillips screwdriver open-end wrench. NOTE Please check the dimensions before any purchase.