AABCOOLING Compressed Gas Duster 400 ml – Preparation for Cleaning and Freezing, Cold Bomb, Tube Freezer Spray, Frio Spray, Freezing Kit – 6 Pieces

• ✅ Cold Bomb is a high quality preparation containing a mixture of ecological gases for quick local freezing in a spray up to -50*C and to remove dust from hard-to-reach places with a compressed gas stream.
• ✅ Are you trying to unscrew a stuck or rusted screw but it doesn't want to move? Use our Cold Bomb, frost the screw fitting to -50*C. The metal shrinks under the influence of temperature, and in the case of rusty joints, micro-cracks appear, which contributes to loosening of the screw.
• ✅ Slight body dents can occur anywhere, e.g. during bumps, when parking. Fix it yourself for cheap with Cold Bomb!
• ✅ To freeze, return the freezer kit packaging. Direct the application tube to the appropriate item and press the Flange Spray Assembly nozzle.
• ✅ When cleaning with compressed gas, hold the box with the nozzle facing up. Direct the tube to the application site and pulse the nozzle.

AABCOOLING Compressed Gas Duster Cold Bomb is a high quality preparation containing a mixture of ecological gases for quick local freezing in spray up to -50*C and for dusting hard-to-reach places with a compressed gas stream. Are you trying to unscrew a stuck or rusted screw but it doesn't want to move? Use our Cold Bomb, frost the screw fitting to -50*C. The metal shrinks under the influence of temperature, and in the case of rusty joints, microcracks appear, which contributes to the loosening of the screw. It also facilitates the assembly and disassembly of well-fitting metal parts. Slight body bumps can occur anywhere, e.g. during bumps, when parking. Fix it yourself for cheap with Cold Bomb! Heat the dents with a hair dryer, then cool the surfaces with a AABCOOLING gas cloth for about 10 seconds. The method works only with delicate bumps (without edge and sharp). Are you a DIY lover? Choose our perfect freezer kit for serving applications! You can easily detect microcracks on PCBs using the thermal method. Remember!!! The product is not electrically conductive, but during evaporation there is a phenomenon of water vapor deposition which can damage the electronic components. After freezing, blow and dry the element from moisture. Do not use the product on electrical equipment! To freeze, return the Flange Assembly Spray packaging. Direct the application tube to the appropriate element and press the nozzle. When cleaning with compressed gas, hold the can with the nozzle facing up. Direct the tube to the application site and pulse the nozzle.