Bond-It WP100 Neutral Silicone Sealant (6 Pack) - White

• Permanently elastic – accommodates joint movement up to 25%
• Enhanced PVCu adhesion – contains additional adhesion promoters for PVCu substrates
• Neutral cure oxime silicone – non-corrosive with broad substrate compatibility
• Suitable for alkaline and metal surfaces – increased application flexibility
• Rapid skin and cure – skins in approximately 8 minutes and cures at ~3mm per day
• High elastic recovery – maintains joint integrity after deformation
• Mould resistant (XS1) – contains fungicide for sanitary and high-humidity areas
• Certified to EN 15651-1, -2, -3 – approved for façade, glazing, and sanitary use

Bond-It WP100 Premium Neutral Cure Silicone Sealant (285ml EU3 cartridge in choice of colour and pack size) Flexible, durable sealant for weatherproof, high-movement joints WP100 is a professional-grade, single-component, moisture-curing neutral cure silicone for perimeter sealing and flexible jointing in construction. It is suitable for external door and window frames, infill panels, and joints between dissimilar materials where movement is expected. With permanently elastic performance and enhanced adhesion to PVCu, WP100 provides durable, consistent sealing across a range of substrates. Designed for dynamic jointing, the sealant offers fast skin formation, controlled cure rates, and movement accommodation of up to 25% for internal and external use. It conforms to EN 15651-1, -2 and -3 (F EXT-INT, G, XS1) and incorporates fungicide for mould resistance. Strong elastic recovery, good tensile strength, and resistance to UV exposure, weathering, and temperature extremes support long-term performance in correctly designed joints. Technical Information Tooling time: 5–10 minutes Skin time: 8 minutes Full cure time (at +23°C and 50% RH): ~3 mm per day Application temperature: +5°C to +40°C Service temperature: −60°C to +160°C Shore A hardness: White 20 ±5; Translucent 18 ±5 Tensile strength: 2.55 N/mm² Elongation at break: ~400% Movement accommodation: 25% Secant modulus: ~0.67 N/mm² (mortar) Elastic recovery: 97% Density: 1.2 g/cm³ EN15651-1,2,3 classification: F EXT-INT, G, XS1 Reaction to fire: E Microbiological growth: XS1 Resistance to flow: <3 mm Elastic recovery (after extension): >70% Limitations: Not suitable for use on natural stone, bitumen, asphalt, or aquaria. Over-painting is not recommended. Porous surfaces should be primed prior to application. Yellowing may occur in low UV light conditions.