9510 One-part Epoxy Potting Compound, (Heat Cure required) 30mL Cartridge

• Up to 12 months shelf life at room temperature
• Minimum cure temperature of 80 °C [176 °F]
• Ready to dispense—no mixing is required
• Broad service temperature -65 to 150 °C [-85 to 302 °F]
• Extremely high tensile and compressive strength

9510 is a black, rigid, one-part epoxy potting compound. It has unlimited working time at room temperature and does not require frozen storage. It provides excellent electrical insulation and protects against static discharges, vibration, thermal shock, environmental humidity, salt water and many harsh chemicals. 9510 has a low viscosity and can be readily used in manual, pneumatic and robotic dispensing processes. Application Instructions: For best results, follow the procedure below. This product does not require mixing prior to use, and can be applied with a spatula, trowel, or automated dispensing machine. Cartridge: 1. Twist and remove the cap from the cartridge. Do not discard the cap. 2. Dispense the epoxy evenly to both surfaces. a. For 30 mL size, insert the cartridge in the 8DG-30-1 dispensing gun (see Application Guide). 3. To stop the flow, pull back on the plunger. 4. Clean nozzle to prevent contamination and material build-up. 5. Replace the cap on the cartridge. Cure Instructions Room temperature cure: Do NOT cure at room temperature. This product will only cure at elevated temperatures. Heat cure: Put in oven at 80 °C [176 °F] for 3 h. —OR— Put in oven at 90 °C [194 °F] for 1 h. —OR— Put in oven at 120 °C [248 °F] for 30 min.