8800 Black Flexible Urethane, 2-Part Potting Compound, 375mL Kit

• 2: 1 mix ratio
• 5-7 minute working time
• 24 hour cure at room temperature
• Constant service temperature of -50 to 120 C
• Excellent dielectric properties

Product Description 8800 is a Black Flexible Urethane potting compound. It has a low mixed viscosity and maintains excellent flexibility at low temperatures. In addition, it adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. 8800 is a cost-effective flexible potting option that provides exceptional physical protection and creates minimum stress on circuit boards and surface-mounted devices. It offers superior moisture resistance and is an ideal choice for harsh environment applications, especially salt water exposure and marine applications. Application Instructions- For best results, follow the procedure below. Manual mixing: 1. (Optional) Pre-heat part A to improve surface quality. 2. Scrape settled material free from the bottom and sides of the part A container; stir the contents until homogenous. 3. Measure 2 part by volume of the pre-stirred part A, and pour into the mixing container. Ensure all contents are transferred by scraping the container. 4. Measure 1 part by volume of the part B, and pour into the mixing container. Ensure all contents are transferred by scraping the container. 5. Thoroughly mix parts A and B together. 6. (Optional) Put in a vacuum chamber at 25 in Hg. 7. Pour the mixture into a container holding the components to be protected. 8. Blanket both parts with nitrogen if the material is not used up to prevent moisture. 9. Close the part A and B containers tightly between uses. Attention Mixing 500 g at a time decreases working life and can lead to a flash cure. Limit the size of hand-mixed batches. For large production volumes, contact MG Chemicals Technical Support for assistance. Cure Instructions Room temperature cure: Let cure at room temperature for 24 h. Heat cure: Put in oven at 65 °C [149 °F] for 30 min. —OR— Put in oven at 80 °C [176 °F] for 25 min. Directions Mix 2 parts A to 1 part B, pour into mixing container, mix thoroughly, optionally vacuum chamber at 25 in Hg, pour mixture into container holding components, blanket with nitrogen if not used up, close containers tightly between uses. Cure at room temperature for 24 hours or in oven at 65°C for 30 minutes or 80°C for 25 minutes.