868.3 MHz Garage Door Opener for BS Handheld Transmitter, Replacement Remote Control Garage Door Compatible HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS 2 Channel (Black

• Compatible Garage Door Opener List:For BS Series Remote: With 868.3MHz Rolling Code, our remote control is a great replacement for Hormann BiSecur Series Transmitter HSE1-868-BS, HSE2-868-BS, HSE4-868-BS, HS1-868-BS, HS4-868-BS, HS5-868-BS, HSS4-868-BS, HSP4-868-BS, HSD2-868-BS
• This remote is not the original remote,replacement garage door opener.
• Two programming methods: copying the code from the original remote control,programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work.
• 2 channels: 2 buttons correspond to 3 independent channels, and each button can control a door opener individually.
• Satisfaction Defender: If you are not sure if your motor/remote is compatible with our remote, do not hesitate to contact us, We are always behind our products

868 MHz garage door opener, replacement garage door opener compatible with handheld transmitter HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS remote control. Compatible models: HS1-868-BS. HS4-868-BS. HS5-868-BS. HSE1-868-BS. HSE2-868-BS. HSE4-868-BS. HSP4-868-BS. HSD2-868-BS. For HSS4-868-BS Note: Built-in scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), it will not work. How to program? 1) Press and hold the button of the new remote control, you want to save the code of the original remote control, press and hold it, press another button three times until the red LED light lights up for 10 seconds, and release all buttons. 2) Place the original remote control as close as possible on the left side of the new remote control. 3) Press the button of the original remote control. You need to copy the code until the LED flashes red and blue alternately. Check if the LED of the new remote control flashes blue. If not, try to get as close to the original remote control as possible. 4) When the blue light of the new remote control flashes quickly, the learning process is complete. Release all buttons. 5) Please do the same procedure for the remaining buttons. Reset method: Each button on the remote control is assigned to a new radio code using the following steps. (1) Remove the battery for 10 seconds. (2) Press and hold one button of the remote control. (3) Insert the battery. The LED flashes slowly blue for 4 seconds. The LED flashes quickly blue for 2 seconds. The LED lights up blue for a long ( 4) When you release the button of the remote control, all radio codes are reassigned. D Note: If the remote control button is released prematurely, no new radio codes will be assigned.